Supported Devices
| Device Type | Modbus TCP (Ethernet) | RS485 | Curtailment |
|---|---|---|---|
| SunGiga | ✅ | ❌ | ❌ |
Configuration
1: Connecting the LAN (Ethernet) to the Inverter
1a. Connect the LAN (Ethernet cable) to the RJ45 port on the Jinko SunGiga.
2: Jinko SunGiga Configuration
| Steps |
|---|
| 2a. Open the Jinko SunGiga web interface by entering the IP address of the system in a web browser. |
2b. Make sure High priority local control and Enable total active power setting are configured as Close:  |
2c. Make sure Remote/Local is configured as Remote:  |