ESY Residential Hybrid Inverters

Understøttede Enheder

Device Type	Variants	Modbus TCP (Ethernet)	RS485	Curtailment
Sunhome Hybrid inverter Inverter (single phase)	HM6	❌	✅	✅

The SmartgridOne Controller og ESY inverterne kommunikerer via RS485.

Invertere med firmwareversion ældre end følgende har et minimum SoC-niveau på 35%. Fra denne version kan denne indstilling konfigureres af brugeren.

Mindst krævet version: MCU version 1040, DSP version 1042.

You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.

Device Type	Variants	Modbus TCP (Ethernet)	RS485	Curtailment
Sunhome Hybrid inverter Inverter (single phase)	HM6	❌	✅	✅

The SmartgridOne Controller og ESY inverterne kommunikerer via RS485.

Invertere med firmwareversion ældre end følgende har et minimum SoC-niveau på 35%. Fra denne version kan denne indstilling konfigureres af brugeren.

Mindst krævet version: MCU version 1040, DSP version 1042.

You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.