SmartgridOne logo
SmartgridOne logo
App
Integrations
Battery Or Pv Inverters
Fronius Integration
Huawei Integration
Sma Integration
Sma Ftp
FTP Push for SMASMA Integration MonitoringSMA_API
Solar Edge Integration
Solis Integration
Energy Meters
Monitoring
Web Portal
Whitelabeling App
IntegrationsBattery Or Pv InvertersSma IntegrationSma Ftp

Overview

The FTP Push feature enables your SMA Sunny WebBox to automatically upload inverter data to Eniris' monitoring platform. This integration allows for seamless data collection and monitoring of your solar installation's performance.

Prerequisites

Before starting the configuration, ensure you have:

  • SMA Sunny WebBox with firmware version 1.5 or higher
  • Network (LAN) cable for physical connection
  • Computer with web browser (Chrome, Firefox, or Edge recommended)
  • Network access with Port 21 unblocked for FTP communication
  • Eniris FTP credentials (contact support if you don't have these)
Tip
Tip

Network Requirements

Your network must allow outbound FTP traffic on Port 21. If you're using a firewall, ensure it's configured to allow connections to ftp2.eniris.be.

Connection Setup

  1. Physical Connection

    • Locate the network port on your Sunny WebBox

Sma Ftp

Previous Page

SMA Integration Monitoring

Next Page

On this page

OverviewPrerequisitesNetwork RequirementsConnection SetupFTP ConfigurationKey Name ReferenceInstallation Level KeysInverter Level KeysWeather Station KeysKey NamingVerification StepsTroubleshootingConnection FailuresData Not AppearingError MessagesSupport
  • Connect the provided blue network cable (LAN cable)
  • Connect the other end to your computer or network switch
  • Verify the network LED is lit on both ends

  • Network Access

    • Open your web browser
    • Navigate to one of:
      • http://webbox/
      • http://webbox.com
    • If neither works, check your network settings

    • FTP Configuration

    1. Access Plant Settings

      • In the left navigation tree, locate and select your plant
      • The plant details should appear in the main panel

    2. Navigate to Settings

      • Click the "Settings" tab at the top
      • Find and expand the "Further Applications" section
      • This section contains FTP configuration options

    3. Configure FTP Parameters

      • Click the "Edit" button
      • Enter the following parameters exactly as shown:
      ParameterValueDescription
      FTP Serverftp2.eniris.beEniris FTP server address
      Port21Standard FTP port
      LoginRequest from EnirisYour unique FTP username
      PasswordRequest from EnirisYour secure FTP password
      Server PathLeave emptyNo additional path needed
      Data Export in CSV FormatYesEnable CSV data export
      Data Export in XML FormatYesEnable XML data export

    4. Verify Configuration

      • Click "Save" to store your settings
      • Use the "Test Connection" button to verify
      • A successful test will show a green checkmark
      • Failed tests will show an error message

    Key Name Reference

    When configuring the SMA FTP integration, the system uses specific key naming patterns to identify different device types and data sources. Understanding these patterns can help with troubleshooting and configuration:

    Installation Level Keys

    • Sunny WebBox: Use "Sunny WebBox" or leave empty ("")

    Inverter Level Keys

    The system recognizes inverter data using any of these key name patterns:

    • Keys matching pattern: \d+_SN.* (digits followed by underscore and "SN")
    • Keys matching pattern: ^.{2}-INV.* (two characters, dash, then "INV")
    • Keys starting with (case-insensitive):
      • sn
      • stp
      • wrt
      • wr
      • omv
      • inv
      • core
      • bb omv
      • modbus-
      • ond

    Weather Station Keys

    • Weather Station: Use "weerstation"
    Tip
    Tip

    Key Naming

    These key patterns are automatically recognized by the system. Ensure your device names in the SMA WebBox follow these conventions for proper data mapping and monitoring.

    Verification Steps

    After configuration:

    1. Wait 15 minutes for initial data push
    2. Check your Eniris dashboard for new data
    3. Verify that power and energy values are updating
    4. Monitor for any connection errors

    Troubleshooting

    If you encounter issues:

    Connection Failures

    • Verify network cable connection
    • Check if Port 21 is open in your firewall
    • Confirm FTP credentials are entered correctly
    • Ensure WebBox has internet access

    Data Not Appearing

    • Verify the WebBox time is set correctly
    • Check if data export formats are enabled
    • Wait up to 30 minutes for first data push
    • Look for error messages in WebBox logs

    Error Messages

    • "Connection refused": Check network and firewall settings
    • "Authentication failed": Verify FTP credentials
    • "Timeout": Check internet connection stability
    Forsigtighed
    Forsigtighed

    Important Notes

    • Keep your FTP credentials secure
    • Regular monitoring of the connection status is recommended
    • Update WebBox firmware if you experience persistent issues
    • Contact Eniris support if problems persist after troubleshooting

    Support

    If you need assistance:

    • Contact Eniris support with your WebBox serial number
    • Have your network configuration details ready
    • Include any error messages you've encountered
    • Provide timestamps of when issues occurred