Skip to main content

Shelly Relay

Shelly Logo

Supported Devices​

Device TypeVariantsModbus TCP (Ethernet)
Shelly Plus1 (Mini), 1PM (Mini), 2PM, Uni✅
Shelly Plus PlugIT, S, US, UK
Shelly Pro1, 1PM, 2, 2PM, 3, 4PM, EM
Shelly Gen31 (Mini), 1PM (Mini), 2PM, 1L, 2L, AZ Plug, Plug S, EM
Shelly Gen41 (Mini), 1PM (Mini), 2PM, Plug US, PowerStrip
info

Please note: This integration has not been tested with all the devices listed above. However, since they utilize the same communication protocol, they are expected to operate seamlessly.
Configuration examples in this document are based on the Shelly Pro 2 relay.

Shelly Pro 2 Relay

Wiring​

The communication between the SmartgridOne Controller and the Shelly relay is established via Modbus TCP. For proper Ethernet wiring, please follow the Ethernet wiring guidelines.

Wiring Instructions​

  1. Power Supply Connections

    • L (Live): Connect the live wire to the L terminal of the device.
    • N (Neutral): Connect the neutral wire to the N terminal of the device.
    Power Connections

  2. Relay Output Connections

    • O1 (Relay 1): Connect the live wire for the first circuit to the O1 terminal.
    • O2 (Relay 2): Connect the live wire for the second circuit to the O2 terminal.
    Relay Connections

  3. Device Diagram
    Refer to the diagram printed on the device for detailed wiring instructions. Ensure all connections match the diagram.

    Device Wiring Diagram

Configuration Instructions​

  1. Wire the Device
    Ensure the device is wired according to the provided wiring diagram and connect the Ethernet cable securely.

    Shelly Wiring Example

  2. Access the Shelly Interface

    • Using a phone or other device, connect to the Shelly relay's Wi-Fi network (SSID: ShellyPro2-XXXXXX).
    • Open a browser and navigate to http://192.168.33.1 to access the Shelly interface.

  3. Locate the Ethernet Settings

    • In the Shelly interface, navigate to the Ethernet Settings section.
    • Here, you will find the assigned Ethernet IP address, which is required for connecting the device to the controller.
    Shelly Interface Example
    Ethernet Settings Example
info

Note: Do not modify any settings while locating the Ethernet IP address.

By following these steps, you will retrieve the required IP address for integrating the Shelly relay with the SmartgridOne Controller. For further details and comprehensive documentation, please refer to the official Shelly Installation Guides.