SMA EV Business Charger
Supported Devices
| Device Type | Modbus TCP (Ethernet) | RS485 |
|---|---|---|
| SMA EV Business Charger | ✅ | ❌ |
Configuration
- Connect to your computer in the same LAN network as the charging station, and surf to the charging station's IP address.
- Log into the charging station's local web interface (default login "operator", password "service.kraft"), and go to the "Load Management" tab.
- Fill this out exactly as shown in the image on the below and click save.
Please note:
- Different configurations from the indicated image have not been tested.
- In all cases, you must turn on the Modbus TCP server, leave the base port at 502 and set the register address group to TQ-DM100.
- If you activate SEMP interface, EEBUS, Dynamic Load Management or ASKI via OCPP-S, it may interfere with the control of the smart grid controller. It is strongly discouraged to activate these functions.
