跳到主要内容
logo

Supported Devices

Device TypeModbus TCP (Ethernet)RS485Curtailment
SunGiga

Configuration

1: Connecting the LAN (Ethernet) to the Inverter

1a. Connect the LAN (Ethernet cable) to the RJ45 port on the Jinko SunGiga.

2: Jinko SunGiga Configuration

Steps
2a. Open the Jinko SunGiga web interface by entering the IP address of the system in a web browser.
2b. Make sure High priority local control and Enable total active power setting are configured as Close: Image
2c. Make sure Remote/Local is configured as Remote: Image